Portable Air Operated Diaphragm Waste Oil Pump , 1.5 Diaphragm Pump
Air Operated Diaphragm Waste Oil Pump Introduction
This series of products are made of high quality plastics or
reinforced polypropylene as the pump body, with good physical
properties, with F46 as diaphragm, tetrafluoro as ball, ball seat,
suitable for acid, alkali and various organic solvents. Corrosive
liquid, high viscosity, high viscosity, volatile, flammable,
explosive, highly toxic liquid, ceramic glaze, fruit pulp, glue,
oil tanker bottom oil recovery, temporary tank and so on can be
exhausted and exhausted, especially to solve the problem of
running, risking, dropping, leakage and not allowing empty rotation
of the vane pump, which is the most popular in the country at
present. A new type of pump, which uses compressed air as a power
source, to distribute air through the reciprocating movement of the
valve, drives the diaphragm to squeeze the conveying medium by the
volume pump, which has the advantages of conveying machinery such
as impurity pump, self-priming pump, mud pump, shielding pump,
submersible pump and so on
Max. Self-priming Lift (dry)
Max. Air Pressure
Max. Particle Diameter
Max. Installation Dimension
Air Diaphragm Pump
1. Non leakage
2. Good self priming performance
3. Convey all kinds of medium
4. Material:Cast steel,Alu,SS,PP
1. The pump can suck the peanut, pickles, tomato slurry, red
sausage, chocolate, hops and syrup etc.
2. The pump can suck the paint, pigment, glue and adhesive etc.
3. The pump can suck various glazed slurries of tile, porcelain,
brick and chinaware etc.
4. The pump can suck various grinding materials, corrosive agent
and clean the oil dirt etc.
5. The pump can suck various toxin and flammable or volatility
6. The pump can suck various wedge water, cement slurry and mortar
7. The pump can suck various strong acid, alkali and corrosive
8. It can be used as a front-step tranmission device of the solid
and liquid separation equipment.